Command Reference
getStorageDasdScsiVa7xxxLunMaximumNumber
Returns the maximum allowed LUN number. Currently 127.
addStorageDasdScsiVa7xxxLun
Adds a LUN of the specified size to the specified storage array.
removeStorageDasdScsiVa7xxxLun
Deletes the specified LUN from the specified storage array. All data will be lost.
getStorageDasdScsiVa7xxxLunCapacity
Returns the capacity of the specified LUN on the specified storage array.
getStorageDasdScsiVa7xxxLun
Returns the name of the specified LUN on the specified storage array.
getStorageDasdScsiVa7xxxLunRedundancygroup
Returns the redundancy group of a VA7xxx array LUN. Note the difference between this
command and the very similar getStorageDasdScsiLunRedundancygroup command.
getStorageDasdScsiLunRedundancygroup
Returns the redundancy group number that this DASD LUN is on. This command should only
be used on LUNs that are on an HP VA7xxx storage array.
36
inParam[0] = SCSI VA7xxx DASD name
outParam[0] = Minimum LUN number
inParam[0] = SCSI VA7xxx DASD name
outParam[0] = Maximum LUN number
inParam[0] = SCSI VA7xxx DASD name
inParam[1] = LUN number
inParam[2] = Device capacity (MB)
inParam[0] = SCSI VA7xxx DASD name
inParam[1] = LUN number
inParam[0] = SCSI VA7xxx DASD name
inParam[1] = LUN number
inParam[2] = Units (B,MB,GB)
outParam[0] = Device capacity (MB - unless overridden by inParam[1])
inParam[0] = SCSI VA7xxx DASD name
inParam[1] = LUN number
outParam[0] = SCSI LUN name
inParam[0] = SCSI VA7xxx DASD name
inParam[1] = LUN number
outParam[0] = Redundancy group
inParam[0] = SCSI LUN name
outParam[0] = Redundancy group number
HP StorageWorks NAS 8000 Command Reference