Getstoragedasdscsigenericdevicefile; Getstoragedasdscsihost; Getstoragedasdscsichannel; Getstoragedasdscsitargetid - HP StorageWorks NAS 8000 - Version 1.6.X Command Reference Manual

Command Reference

getStorageDasdScsiGenericDeviceFile

Returns the absolute path to the SCSI generic device file for a DASD.

getStorageDasdScsiHost

Returns the SCSI driver host number for a DASD.

getStorageDasdScsiChannel

Returns the SCSI HBA channel number used to access the SCSI DASD.

getStorageDasdScsiTargetId

Returns the SCSI target ID number used to access the SCSI DASD.

getStorageDasdScsiMaxNumberLuns

Returns the maximum number of LUNs supported by the system.

getStorageDasdScsiVa71xxList

Returns a list of the storage arrays connected to the HP NAS 8000 system.

getStorageDasdScsiVa74xxList

Returns a list of VA74xx disk arrays attached to the system.

getStorageDasdScsiVA7xxxList

Returns a list of disk arrays attached to the system.

getStorageDasdScsiVa7xxxManagementSoftwareRunning

Informs whether Array Management Software is running.

getStorageDasdScsiVa7xxxAlias

Returns the alias for the specified storage array.
32
outParam[0:N] = SCSI DASD name
inParam[0] = DASD name
outParam[0] = DASD generic device file
inParam[0] = SCSI DASD name
outParam[0] = Host number
inParam[0] = DASD name
outParam[0] = DASD channel number
inParam[0] = SCSI DASD name
outParam[0] = SCSI DASD target ID
outParam[0] = Maximum number of user data LUNs
outParam[0:N] = SCSI DASD Va71xx name list
outParam[0:N] = SCSI DASD Va7xxx name list
outParam[0:N] = SCSI DASD Va7xxx name list
outParam[0] = T (running) or F (not running)
inParam[0] = SCSI VA7xxx DASD name
HP StorageWorks NAS 8000 Command Reference