Setstoragevolumegroupname; Getstoragevolumegroupavailablecapacity; Getstoragevolumegrouptotalcapacity; Getstoragevolumegroupvolumeminimumcapacity - HP StorageWorks NAS 8000 - Version 1.6.X Command Reference Manual

Command Reference

setStorageVolumegroupName

Renames an existing volume group.

getStorageVolumegroupAvailableCapacity

Returns the available capacity – that is the amount of free space – on the specified volume
group.

getStorageVolumegroupTotalCapacity

Returns the total raw capacity of the specified volume group.

getStorageVolumegroupVolumeMinimumCapacity

Returns the minimum size that can be used to create a file volume or snapshot on the specified
volume group.

getStorageVolumegroupVolumeMaximumCapacity

Returns the maximum size that can be used to create a file volume or snapshot on the specified
volume group.

getStorageVolumegroupVolumeCapacityIncrement

Returns the size increment that can be used to create a file volume or snapshot on the specified
volume group. Currently 32MB.

getStorageVolumegroupLunList

Returns a list of the LUNs contained in the specified volume group.
40
inParam[0] = Existing volume group name
inParam[1] = New volume group name
inParam[0] = Volume group name
inParam[1] = Units (B,MB,GB)
outParam[0] = Available Capacity (MB - unless overridden by inParam[1])
inParam[0] = Volume group name
inParam[1] = Units (B,MB,GB)
outParam[0] = Total Capacity (MB - unless overridden by inParam[1])
inParam[0] = Volume group name
inParam[1] = Units (B,MB,GB)
outParam[0] = Minimum Volume Capacity (MB - unless overridden by inParam[1])
inParam[0] = Volume group name
inParam[1] = Units (B,MB,GB)
outParam[0] = Maximum Volume Capacity (MB - unless overridden by inParam[1])
inParam[0] = Volume group name
inParam[1] = Units (B,MB,GB)
outParam[0] = Volume Capacity Increment (MB - unless overridden by inParam[1])
inParam[0] = Volume group name
outParam[0:N] = LUN handle list
HP StorageWorks NAS 8000 Command Reference