Getstoragevolumevolumemaximumcapacity; Getstoragevolumevolumecapacityincrement; Getstoragevolumefilelist; Getstoragevolumefilesystemlist - HP StorageWorks NAS 8000 - Version 1.6.X Command Reference Manual

getStorageVolumeVolumeMaximumCapacity

Returns the maximum capacity for the specified storage volume.

getStorageVolumeVolumeCapacityIncrement

Returns the capacity increment (in bytes, megabytes, and gigabytes) used to create or resize
file and snapshot volumes, i.e., when creating volumes, the capacity modulo increment must
be equal to 0.

getStorageVolumeFileList

Returns a list of file volumes that exist on the HP NAS 8000 system.

getStorageVolumeFileSystemList

Returns a list of file volumes.

getStorageVolumeFileUserList

Returns a list of existing user-data file volume names.

getStorageVolumeFileType

Returns the file volume type.
Where type can be one of:

addStorageVolumeFile

Creates a new file volume in the specified volume group.
HP StorageWorks NAS 8000 Command Reference
inParam[1] = Units (B,MB,GB)
outParam[0] = Minimum volume capacity (MB - unless overridden by inParam[1])
inParam[0] = Volume name
inParam[1] = Units (B,MB,GB)
outParam[0] = Minimum volume capacity (MB - unless overridden by inParam[1])
inParam[0] = Volume name
inParam[1] = Units (B,MB,GB)
outParam[0] = Minimum volume capacity (MB - unless overridden by inParam[1])
outParam[0:N] = Volume name list
outParam[0:N] = Volume name list
outParam[0:N] = Volume name list
inParam[0] = File volume name
outParam[0] = File volume type
Unknown
System
User
inParam[0] = Volume name
inParam[1] = Volume group name
inParam[2] = Size (MB)
Command Reference
43