Quick Operation Guide; Attaching The Battery Pack - Sharp ViewCam Slim VL-ME100S Operation Manual

Quick Operation Guide

Quick Operation Guide
Please consult this operation manual further for
details on these and other functions of your
camcorder.
Charging the Battery Pack
1
Connect the supplied power cord to the
AC power socket on the AC adapter/
battery charger, and insert the AC plug
into a power outlet.
2
Align the d mark on the battery pack
with the f mark on the charger (1) and
guide the battery into the groove.
Pressing the battery (2), slide it in the
direction of the arrow (3) until it locks
into place.
• The CHARGE indicator lights up. The
indicator goes off when the battery is
fully charged.
1
3
CHARGE indicator

Attaching the Battery Pack

1
Make sure that the POWER switch is set
to OFF.
2
Pull out the viewfinder completely, and
then lift it up.
3
Align the mark on the side of the
battery pack with the a mark on the
camcorder (1). Press the battery pack
and slide it down completely until it locks
into place (2).
2
i
Inserting a Mini DV Cassette
1
2
3
2
4
5
1
Supply power to the camcorder.
Hold the camcorder as shown, slide the
cassette compartment door release and
open the cassette compartment door
completely.
Insert the cassette fully with the window
facing upwards and the erasure protect
tab facing outwards.
Press the mark gently until the
cassette holder clicks into place.
Close the compartment door by pressing
the centre until it clicks into place.
R E C R E C
SAVE SAVE
mark