1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Camcorder
  5. VL-MC500H
  6. Service manual

Sharp VL-MC500H Service Manual

Liquid crystal digital camcorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1. SPECIFICATIONS .............................................................................................................................. 2
2. PART NAMES .................................................................................................................................... 3
3. DISASSEMBLY OF THE SET ............................................................................................................ 4
4. MECHANISM ADJUSTMENT JIGS AND PARTS .............................................................................. 6
ITEMS AND INTERVALS ................................................................................................................... 7
6. MECHANICAL ADJUSTMENTS AND CHECKS ................................................................................ 8
7. TAPE RUNNING ADJUSTMENT ..................................................................................................... 11
(DISASSEMBLY AND REASSENBLY) ........................................................................................... 13
9. ADJUSTING THE ELECTRICAL CIRCUITS .................................................................................... 20
10.USEFUL TIPS ................................................................................................................................... 37
11.SIGNAL FLOW DIAGRAMS ............................................................................................................. 38
12.BLOCK DIAGRAMS ......................................................................................................................... 41
13.SCHEMATIC DIAGRAMS ................................................................................................................ 48
14.SEMICONDUCTOR LEAD IDENTIFICATION ............................................................................... 102
15.PRINTED WIRING BOARD ASSEMBLIES .................................................................................... 104
16.REPLACEMENT PARTS LIST ....................................................................................................... 119
17.PACKING OF THE SET ................................................................................................................. 139
SERVICE MANUAL
LIQUID CRYSTAL DIGITAL CAMCORDER
MODELS
In the interests of user-safety (Required by safety regula-
tions in some countries) the set should be restored to its
original condition and only parts identical to those specified
be used.
CONTENTS
SHARP CORPORATION
1
VL-MC500S/H/E
S92Q6VL-MC500
VL-MC500S
VL-MC500H
VL-MC500E
Page
PAL

Advertisement

Table of Contents
loading

Related Manuals for Sharp VL-MC500H

Summary of Contents for Sharp VL-MC500H

  • Page 1: Table Of Contents

    VL-MC500S/H/E SERVICE MANUAL S92Q6VL-MC500 LIQUID CRYSTAL DIGITAL CAMCORDER VL-MC500S VL-MC500H VL-MC500E MODELS In the interests of user-safety (Required by safety regula- tions in some countries) the set should be restored to its original condition and only parts identical to those specified be used.

  • Page 2: Specifications

    VL-MC500S/H/E 1. SPECIFICATIONS Signal System: PAL standard Recording System: 2 rotary heads, helical scanning system Cassette: Digital VCR Mini DV video cassette Recording/Playback Time: 90 minutes (DVM60, LP mode) Tape Speed: SP mode: 18.831 mm/second LP mode: 12.568 mm/second Pickup Device: "...

  • Page 3: Part Names

    VL-MC500S/H/E 2. PART NAMES For details on the use of each control. Light adjustment sensor Remote sensor Flash cover release Flash Media Selection switch ( Tape mode/ Card mode selection switch) Start/Stop button Hand strap Card slot cover release PHOTO button Zoom lens DISPLAY button Hand grip...

  • Page 4: Disassembly Of The Set

    VL-MC500S/H/E 3. DISASSEMBLY OF THE SET Note: Before removing the cabinet, turn off the power supply, and ascertain that the battery have been removed. LCD Panel Battery Unit 1) Detach the battery unit. 1) Remove the FPC of the LCD panel, and detach the LCD panel 2) Remove the three screws ((d)XiPSN17P03000).
  • Page 5 VL-MC500S/H/E 1) Take out the mechanism in the direction of the arrow. 2) Remove the three floating screws ((a)LX-BZ0251TAFD) and the one floating screw ((b)LX-BZ0253TAFN). 3) Remove the five screws ((d)XiPSN17P03000) to detach the battery cover. Battery Cover 1) Detach the lithium battery lid. 2) Turn the tilt section in the direction of the arrow, and remove the five Camera Rear Cabnet screws...

  • Page 6: Mechanism Adjustment Jigs And Parts

    VL-MC500S/H/E 4. MECHANISM ADJUSTMENT JIGS AND PARTS Configuration 1. Name 4-1. Mechanism check adjustment jigs 2. Part No. 3. Code <Note: The entries of list> * Model, Uses Remarks 1. Tension gauge 4N 1. Dial tension gauge 1. PB-use cassette 1.

  • Page 7: Inspection And Maintenance Items And Intervals

    VL-MC500S/H/E 5. INSPECTION AND MAINTENANCE ITEMS AND INTERVALS In order to keep the mechanical section always in good condition, perform the following inspection and maintenance at regular intervals. In addition, after repair, perform the following maintenance items regardless of how long the user has been using the unit. 5-1.

  • Page 8: Mechanical Adjustments And Checks

    VL-MC500S/H/E 6. MECHANICAL ADJUSTMENTS AND CHECKS The items discussed here relate to general on-site servicing (field servicing). Adjustments and replacements that require sophisticated facilities, jigs and technology are omitted. In addition, in order to maintain the characteristics that the unit has when it is new, not only are inspection and maintenance necessary, but it is absolutely necessary that, for example, the tape not be damaged, and always use jigs for adjustments that require them.
  • Page 9 VL-MC500S/H/E 6-4. Back tension torque check and adjustment in record (playback) mode Tension roller position (S guide standard) AC adapter used, with cassette controller assembly (1) Checking 0 ± 0.3 Set the torque cassette (SD-1015), and make sure in the SP record mode that the supply side torque is within the standard shown below (or in the playback Screw2 mode for the tape on which the signal has been SP-recorded).
  • Page 10 VL-MC500S/H/E <REW back tension standard> (If the tension fluctuates, read its center value.) 15 ± 12mN 6-8. Checking of winding Tu reel base ratchet torque DC3V, without cassette controller assembly (Independent Mechanism) (1) Remove the cassette controller assembly, then apply DC3V to the loading motor and put the system into standby mode.

  • Page 11: Tape Running Adjustment

    VL-MC500S/H/E 7. TAPE RUNNING ADJUSTMENT 7-1. Adjustment locations <Replacement parts> Adjust the height of only · T roller, arm replaced parts with the · Tu guide, arm adjusting jig. · Slide chassis Adjustment procedure 7-2 Running rough Running final Running adjustm- adjustment adjustment Cassette controller...
  • Page 12 VL-MC500S/H/E 7-4. Running rough adjustment (With cassette controller) 1) Su, Tu guide roller height adjustment Entrance side Exit side <Method and description> ±1/4 shift ±1/4 shift Normal (1) Loosen the guide roller lock screw, then tighten loosely so that the roller turns easily. (2) Replay an alignment tape, and adjust the Sup, Tu guide roller so that the envelope sides of entrance and exit are flat.

  • Page 13: Mechanical Section Assembly And Parts Replacement (Disassembly And Reassenbly)

    VL-MC500S/H/E 8. MECHANICAL SECTION ASSEMBLY AND PARTS REPLACEMENT (DISASSEMBLY AND REASSEMBLY) Mechanical section disassembly and reassembly are explained in this section. For removal of the cabinet, etc., refer to 3. DISASSEMBLY OF THE SET. <Precautions> 1. Always replace cut washers that have been removed, for example in parts replacement, with new ones. 2.
  • Page 14 VL-MC500S/H/E (6) STOP mode (5) PLAYBACK (RECORD, FF, VSF) mode The system is in the STOP (Rec Lock in CAMERA mode) The mechanism position for playback, record, FF and fast position; the S and the T pole bases are snap-fitted to the drum feed playback.
  • Page 15 VL-MC500S/H/E 8-3. How to operate with the circuit board without the cassette controller assembly. In this method, if the procedure is followed incorrectly there is danger of damaging the mechanism and the tape, so except in special cases, such as when measuring the VSR torque, do not perform this procedure. Normally operate this unit with the cassette controller assembly attached.
  • Page 16 VL-MC500S/H/E 8-5. Reassembly 8-5-1. Reassembly in side of the main chassis. Note) Numbers before part names are given as a guide to the order of assembly. As for greasing/oiling/cleaning places refer to the attached drawings (Grease/Oil application side of the main chassis). Pinch drive lever Groove grease Intermediate gear angle...
  • Page 17 VL-MC500S/H/E 8-5-2. Reassembly in side of the Slide chassis. Note) Numbers before part names are given as a guide to the order of assembly. As for greasing/oiling/cleaning places refer to the attached drawings (Grease/Oil application side of the slide chassis) T roller upper Sensor FPC cover flange...
  • Page 18 VL-MC500S/H/E 8-5-3. Main chassis assembly and slide chassis assembly assembling method (1) Enter the coupling mode. (In this position, the cam groove of the T arm operation lever in the figure is parallel to the side of the main chassis, and the poll base is slightly moved.) (2) Insert the slide chassis side operation pins ( 1 tension arm, 2 Tu guide arm, 3 pinch lever) in the position shown below at the main chassis side, move the slide chassis in the arrow direction, using A to D as guides, insert the loading lever operation pin into the groove of slide chassis, and install with the 4 screws.
  • Page 19 VL-MC500S/H/E GREASE/OIL APPLICATION From rear surface side Rear surface · groove side surface Front surface · rear surface · groove From rear side surface surface side Main cam Drum base assembly Loading lever Tu loading arm S loading arm Intermediate gear angle Enabled after Including groove assembling...

  • Page 20: Adjusting The Electrical Circuits

    VL-MC500S/H/E 9. ADJUSTING THE ELECTRICAL CIRCUITS Before starting the electric circuit adjustment • The adjustment methods described herein are used, in most cases, when the expendable mechanical parts, including the video head, have been replaced, at which time the electrical circuits need to be readjusted. Before adjusting the electrical circuits, make sure that the mechanism works properly (i.e., the mechanism is properly adjusted).
  • Page 21 VL-MC500S/H/E VL-MC500S/H/E Service jig configuration...
  • Page 22 VL-MC500S/H/E [TEST POINT] (Wiring board diagram: Main Side A) TL1242(INT MIC R) TL1216(INT MIC L) EE level check EE level check Frequency character check Frequency character check TL604 TL1236 C1201 TL1245 R600 TL1237 TL1216 C3701 SC1202 TL1252 RMC701 SC1201 TL1210 L3701 TL1225 TL1214...
  • Page 23 VL-MC500S/H/E [Making adjustments] Adjusting the servo system controller and related parts 1. Setting the system codes Replacement of IC705 E PROM requires the following data to be set in this order. [Procedure] Set the unit to the VCR mode and set the data for each address. Code 1.
  • Page 24 VL-MC500S/H/E 3. SHUT OFF adjustment Mode VCR ADJ mode Procedure 1) Load a recordable tape, and set the camera mode. 2) Press the "CONTINUE" and then the "TEST SEL" on the remote control for adjustment to enter the TEST mode (T-01 blinks). 3) Select T-03 with the FF or REW key and then press the PB key.
  • Page 25 VL-MC500S/H/E ADJUSTING THE VIDEO I/O CIRCUIT SYSTEM (Wiring board diagram: Main Side A) L907 C953 L912 Q903 R995 R956 TL908 R987 C957 C970 C973 J5701 FL5701 L916 R989 R988 Q907 C971 TL1474 L917 TL1473 R1477 PCO D/A-Y C974 TL1470 R1471 TL1472 R1472 J1401...
  • Page 26 VL-MC500S/H/E ADJUSTING THE LCD CIRCUIT * To make this adjustment, set the backlight switch to the "NORMAL" position. (Wiring board diagram: Main Side B) (Wiring board diagram: Main Side A) C2805 C2808 R2806 C420 TL4437 C419 R418 C418 TL4429 TL418 C421 C410 TL4440...
  • Page 27 VL-MC500S/H/E 4. White Balance adjustment Test point LCD panel display surface Address VCR ADJ 584, VCR ADJ 586 Mode VCR AV input Procedure 1) Input the white 40% signal to AV input. 2) Input the white 40% signal to the standard monitor, and adjust it to become equal to that of the screen. Adjustment Standard monitor rating...
  • Page 28 (1) Start the Internet Explorer or Netscape Navigator. (2) Access the following address. (URL:http://www.rcg.kami.sharp.co.jp/quics/e_index.html) Select the "EUI48/64 ID code control system" from the "Service" item. Note: If you want to establish a connection by directly inputting the URL, please input the following.
  • Page 29 VL-MC500S/H/E (5) Click on [Repair use]. Click (6) Input the necessary information for the application. For the indispensable input items, be sure to input them. Select the [Group/company] and [Kind name] from the list. Input the [Model name]. Input the [Serial number]. Input the [Site/department of repair].
  • Page 30 VL-MC500S/H/E 9-2. Camera Section Adjustments 9-2-1. Camera section service (1) Camera adjustment is performed after the set has been completed. (2) Subjects, measuring instruments and jigs needed for camera section service and adjustments • Gray scale chart • Frequency counter •...
  • Page 31 VL-MC500S/H/E 4) Operation flow FF or REW PLAY FF or REW PLAY STOP Address is selected and specified, with the data called. Then the called data are selected and fixed. The operation flows in this sequence. 5) When the adjustment is complete: Press the "CONTINUE"...
  • Page 32 VL-MC500S/H/E (4) Camera signal system adjustment mode In the camera signal system adjustment mode, the automatic white balance is disabled to allow for the adjustment of the camera unit. At this time, the white balance mode is fixed at the INDOORS mode and the focus mode is switched to the manual focus mode. 1) Shifting to the camera signal system adjustment mode Set the data for the address "0000"...
  • Page 33 VL-MC500S/H/E 9-2-4. Adjustment procedures Adjustment method Item (1) Auto-focus adjustment Set the unit to the auto-focus function adjustment mode and write data to the address "13FD" one after another. This executed the adjustments automatically. The items to be adjusted are as listed below. Every time an adjustment is made properly, the data "FF"...
  • Page 34 VL-MC500S/H/E Adjustment method Item (4) Iris AE coarse adjustment (1) Video output is observed with the oscilloscope in the grey scale standard record state, • Measurement terminal: the data of address "0002" is rewritten, and the luminance signal level is adjusted white to 720 ±...
  • Page 35 VL-MC500S/H/E Adjustment method Item (1) White balance adjustment is performed repeatedly. (7) White balance adjustment • Measurement terminal: EE output • Address: "0128" INDOOR_W/B R "012A" INDOOR_W/B R • Measuring instrument: Vector scope • Object: Grey scale • Data variation width: "0000"...
  • Page 36 VL-MC500S/H/E Item Adjustment method (12) Iris AE adjustment (1) Set the unit to the normal operation mode (write the data " FF" to the address • Measurement terminal: "0000"). S terminal luminance signal output (2) Observe the video output with an oscilloscope in the gray scale standard recording (75 Ω...

  • Page 37: Useful Tips

    VL-MC500S/H/E 10. USEFUL TIPS (PROBLEMS DIFFER FROM THOSE FOUND ON VHS OR 8MM DECKS BECAUSE THE SIGNALS ARE DIGITALLY PROCESSED.) Camera (EE mode) Camera (REC mode) VCR (EE mode) VCR (PB mode) Picture fails to appear when tape Picture fails Blueback fails recorded on this to appear...

  • Page 38: Signal Flow Diagrams

    VL-MC500S/H/E 11. SIGNAL FLOW DIAGRAMS 11-1. EE MODE FLOW (VIDEO) WAVEFORM DIAGRAM (DURING COLOR BAR RECORDING) IC4401 291pin Y/YC Output CAM ADIN CH1=500mV 20µs/d DC P*10 IC201 CAM ENGINE IC4401 23pin ZYP3 Input 5ms/d CH1=1V DC P*10 28 31 35 37 38 IC4401 222pin CDY3 Output VIO ENGINE IC4401...
  • Page 39 VL-MC500S/H/E WAVEFORM DIAGRAM 11-3. FLOW IN PB MODE (VIDEO) (DURING COLOR BAR PLAYBACK) HEAD AMP IC3401 32pin Output IC3401 39pin PBDATA Input 5ms/d 5ms/d PB_DATA CH1=500mV CH1=500mV DC P*10 DC P*10 B TO B SC3301 PB_DATA IC3401 EQ/PLL IC3401 44pin Input IC3403 5ms/d CH1=1V...
  • Page 40 VL-MC500S/H/E 11-5. FLOW IN PB MODE (AUDIO) WAVEFORM DIAGRAM (1.6 kHz SINE WAVE) From IC3404 same as in Video PB system 10µs/d CH1=1V DC P*10 IC452 REC/PB ENGINE DODAT 16Bit ADC/DAC IC1602 AUD-R_DA_OUT AUD-L_DA_OUT IC600 AUDIO-R_IN/OUT SP(+) AUDIO-L_IN/OUT SP(-)

  • Page 41: Block Diagrams

    VL-MC500S/H/E 12. BLOCK DIAGRAMS 12-1. SYSTEM BLOCK DIAGRAM...
  • Page 42 VL-MC500S/H/E 12-2. CAMERA SECTION BLOCK DIAGRAM...
  • Page 43 VL-MC500S/H/E 12-3. VIO ENGINE SECTION BLOCK DIAGRAM...
  • Page 44 VL-MC500S/H/E 12-4. REC/PB SECTION BLOCK DIAGRAM...
  • Page 45 VL-MC500S/H/E 12-5. AUDIO/DIGITAL OUTPUT SECTION BLOCK DIAGRAM...
  • Page 46 VL-MC500S/H/E 12-6. CAMERA CIRCUIT BLOCK DIAGRAM...
  • Page 47 VL-MC500S/H/E - M E M O -...

  • Page 48: Schematic Diagrams

    VL-MC500S/H/E 13. SCHEMATIC DIAGRAMS 13-1. OVERALL SCHEMATIC DIAGRAM 48~49...
  • Page 49 VL-MC500S/H/E 13-2. CAMERA ENGINE SCHEMATIC DIAGRAM 50~51...
  • Page 50 VL-MC500S/H/E 13-3. REC/PB ENGINE SCHEMATIC DIAGRAM 52~53...
  • Page 51 VL-MC500S/H/E 13-4. AUDIO I/O SCHEMATIC DIAGRAM 54~55...
  • Page 52 VL-MC500S/H/E 13-5. MEC/SYS MiCON SCHEMATIC DIAGRAM 56~57...
  • Page 53 VL-MC500S/H/E 13-6. POWER2 SCHEMATIC DIAGRAM å AND SHADED COMPONENTS=SAFETY RELATED PARTS å å å å 58~59...
  • Page 54 VL-MC500S/H/E 13-7. CAMERA CONN SCHEMATIC DIAGRAM 60~61...
  • Page 55 VL-MC500S/H/E 13-8. VIDEO I/O SCHEMATIC DIAGRAM 62~63...
  • Page 56 VL-MC500S/H/E 13-9. MOTOR DRIVER SCHEMATIC DIAGRAM 64~65...
  • Page 57 VL-MC500S/H/E 13-10. POWER1 SCHEMATIC DIAGRAM 66~67...
  • Page 58 VL-MC500S/H/E 13-11. LCD SCHEMATIC DIAGRAM 68~69...
  • Page 59 VL-MC500S/H/E 13-12. CONNECTION(B-B) SCHEMATIC DIAGRAM 70~71...
  • Page 60 VL-MC500S/H/E 13-13. EQ/PLL SCHEMATIC DIAGRAM 72~73...
  • Page 61 VL-MC500S/H/E 13-14. CAM/CARD MiCON SCHEMATIC DIAGRAM 74~75...
  • Page 62 VL-MC500S/H/E 13-15. VIDEO I/O ENGINE SCHEMATIC DIAGRAM 76~77...
  • Page 63 VL-MC500S/H/E 13-16. DAC SCHEMATIC DIAGRAM 78~79...
  • Page 64 VL-MC500S/H/E 13-17. USB/SD CTL SCHEMATIC DIAGRAM 80~81...
  • Page 65 VL-MC500S/H/E 13-18. LENS MICON SCHEMATIC DIAGRAM 82~83...
  • Page 66 VL-MC500S/H/E 13-19. LENS CONN SCHEMATIC DIAGRAM 84~85...
  • Page 67 VL-MC500S/H/E 13-20. LENS DRIVE SCHEMATIC DIAGRAM 86~87...
  • Page 68 VL-MC500S/H/E 13-21. CARD CONN SCHEMATIC DIAGRAM 88~89...
  • Page 69 VL-MC500S/H/E 13-22. MIC AMP SCHEMATIC DIAGRAM 90~91...
  • Page 70 VL-MC500S/H/E 13-23. INVERTER SCHEMATIC DIAGRAM å AND SHADED COMPONENTS=SAFETY RELATED PARTS å 92~93...
  • Page 71 VL-MC500S/H/E 13-24. CCD SCHEMATIC DIAGRAM 94~95...
  • Page 72 VL-MC500S/H/E 13-25. TG SCHEMATIC DIAGRAM 96~97...
  • Page 73 VL-MC500S/H/E 13-26. CDS SCHEMATIC DIAGRAM 98~99...
  • Page 74 VL-MC500S/H/E 13-27. HEAD AMP SCHEMATIC DIAGRAM 100~101...

  • Page 75: Semiconductor Lead Identification

    VL-MC500S/H/E 14. SEMICONDUCTOR LEAD IDENTIFICATION 3LN01S HN2A01FU 2SC4738Y 2SA1588Y KRX203U 3LP01S HN2C01FU FMMT717 KRC404E KTX101UY KTA2014EY XP05534 FMMT619 RN4986 HN1B04FU 2SC4213B KTC4075EY 2SC5376B RT1N144U RT1P441U 2SC4627CD CPH3206 RT1N141U 2SC5383F CPH5504 FMG12 MC2852 2SC4944Y TCSZ04U TA75S01F RN1704 S80937AN S817B28C MA132WK NDS332P KDR732 CPH6702 NDS355AN...
  • Page 76 VL-MC500S/H/E HVC202A KV1812K HVU362 EX1394CE HVU359TR LB11990W BH7277KV LA74206W MB3881++ MN52A6CD NJM2902V PCM3008 H49334HN MB8346BV IXA353WJ MM1449XQ LA73070V MM1323XV UPD16S10 ADC08351 RS5C313/ IX0785TA NJM2143R IXA204WJ TLC2940 NJU7015R IX0809TA TE4100HW NJM2535V IXA357WJ SN2G53CT IXA359WJ IXA358WJ BR24C64F HJM2140R IXA193WJ IXA320WJ...
  • Page 77 VL-MC500S/H/E 15. PRINTED WIRING BOARD ASSEMBLIES MAIN PWB SIDE A C1201 R600 C3701 SC1202 SC1201 RMC701 L3701 R643 L600 R1952 R3742 R3711 R3716 C611 C1203 C3705 C5706 R3721 J600 C612 C955 C610 C956 Q909 R3707 R3706 C3704 R982 C3703 R3705 Q3701 C953 C3707...
  • Page 78 VL-MC500S/H/E SIDE B R3468 C3452 C3432 TH3401 C1708 C1704 IC3402 R3499 R3488 R3427 IC3403 C1714 C3428 R3425 C3474 R3480 R3429 R3428 TH3402 R3462 R3451 R1423 R3487 R3432 R3486 C3451 R3452 L1404 R1435 R1437 C3444 C3431 R1713 C1406 C3457 R3465 C1416 C1418 C1417 R1434...
  • Page 79 VL-MC500S/H/E CAMERA PWB SIDE A R2501 R2503 R2530 R2528 C2521 IC2501 R2531 C2502 C2506 C2516 R2504 R556 C2507 L501 R510 C2512 C2513 R2509 R502 R2510 C2503 C507 C510 TL1027 R509 IC501 TL513 TL1033 C505 C1016 TL511 TL512 R1019 TL510 TL514 TL501 TL1032 TL1026...
  • Page 80 VL-MC500S/H/E SIDE B TL2514 R2529 R2524 TL2505 Q2503 R2522 TL2503 TL2516 TL2501 TL2512 R2518 Q2502 R2517 TL2509 R2532 C1018 TL2502 TL2511 TL2513 C1019 TL1039 C1001 C2514 TL2515 C1017 TL1037 R2533 TL2517 TL1036 TL1001 R1013 TL2518 TL2510 TL2504 TL1002 TL2506 TL1003 TL1004 R1017 TL1005...
  • Page 81 VL-MC500S/H/E CARD PWB SIDE A SC1501 P1504...
  • Page 82 VL-MC500S/H/E SIDE B...
  • Page 83 VL-MC500S/H/E INVERTER PWB SIDE A Q9801 TL9804 C9810 L9801 TL9802 TL9807 C9812 TL9801 TL9806 TL9817 TL9808 TL9805 TL9813 TL9815 TL9816 TL9814 TL9818 TL9803 SC9802...
  • Page 84 VL-MC500S/H/E SIDE B SW9800...
  • Page 85 VL-MC500S/H/E CCD PWB SIDE A TL91 RMC91 TL93 TL92 TL2 TL3 TL12 C2 TL10 TL14 TL13 C109 TL11 TL109 IC21 TL107 TL111 TL112 FB22 SC101 TL102 TL8 TL103 TL104TL105TL106TL108TL110TL113...
  • Page 86 VL-MC500S/H/E SIDE B P101 TL126 C110 TL125 C115 C108 C114 R106 TL124 R107 C102 R102 TL123 C107 IC101 R108 TL122 C101 R109 TL121 R103 TL120 R110 C104 TL119 C105 C111 L101 TL118 TL117 L102 TL116 TL115...
  • Page 87 VL-MC500S/H/E HEAD AMP PWB Component Side SIDE A R332 C320 C315 R330 R331 R333 R321 R308 C322 C304 R320 Q302 C331 C307 C330 R318 P306 C305 R312 C324 R323 C319 C311 R304 R325 C333 Q303 C301 C327 R324 C332 C342 C313 C340 C323...
  • Page 88 VL-MC500S/H/E Component Side SIDE B C345 L301 C303 Wiring Side SIDE B...
  • Page 89 VL-MC500S/H/E - M E M O -...

  • Page 90: Printed Wiring Board Assemblies

    Part No. Description Code EXPLODED VIEWS DUNTKB321QA02(VL-MC500S/R) DUNTKB321QA03(VL-MC500H) DUNTKB321QA04(VL-MC500E/W/X) ELECTRICAL PARTS LIST MAIN PWB UNIT Parts marked with " å " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining INTEGRATED CIRCUITS the safety and performance of the set.
  • Page 91 VL-MC500S/H/E Ref. No. Part No. Description Code Ref. No. Part No. Description Code L204 VPCEM470M3R7NY Peaking, 47µH Q911 VSCPH6702++-1Y CPH6702++ L403 VPD9M1R0MR20NY Peaking, 1µH Q1402 VS2SC5376B+-1Y 2SC5376B+ L471 VPD9M8R2J2R0NY Peaking, 8.2µH Q1403 VS2SC5376B+-1Y 2SC5376B+ L600 VPCEM470M3R7NY Peaking, 47µH Q1404 VSKRX203U++-1Y KRX203U++ L601 VPBWM100KR50NY...
  • Page 92 VL-MC500S/H/E Ref. No. Part No. Description Code Ref. No. Part No. Description Code C643 VCKYCY0JB105KY 6.3V Ceramic C401 RC-KZ0083TAZZY 10V Ceramic C644 VCKYCY0JB105KY 6.3V Ceramic C402 RC-KZ0083TAZZY 10V Ceramic C403 RC-KZ0083TAZZY 10V Ceramic C645 VCKYCZ1AB104KY 10V Ceramic C701 VCKYCY1AF105ZY 10V Ceramic C404 VCSATA1AJ475MY 10V Tantalum...
  • Page 93 VL-MC500S/H/E Ref. No. Part No. Description Code Ref. No. Part No. Description Code C952 RC-KZ0071TAZZY 6.3V Ceramic C1712 VCKYCZ1AF104ZY 10V Ceramic C953 VCKYCZ1HB102KY 1000p 50V Ceramic C1713 VCKYCZ1HB102KY 1000p 50V Ceramic C954 VCKYCZ1HB102KY 1000p 50V Ceramic C1714 VCKYCZ1AF104ZY 10V Ceramic C955 RC-KZ0075TAZZY 16V Ceramic...
  • Page 94 VL-MC500S/H/E Ref. No. Part No. Description Code Ref. No. Part No. Description Code C3434 VCKYCZ1CB103KS 0.01 16V Ceramic C5704 VCKYCZ1HB102KY 1000p 50V Ceramic C3436 VCSATA0YJ336MY Tantalum C5705 VCKYCZ1CB103KS 0.01 16V Ceramic C3442 VCCCCZ1HH180JY 50V Ceramic C5706 VCKYCZ1CB103KS 0.01 16V Ceramic C3443 VCCCCZ1HH220JY 50V Ceramic...
  • Page 95 VL-MC500S/H/E Ref. No. Part No. Description Code Ref. No. Part No. Description Code R608 VRS-CZ1JF332JY 3.3k 1/16W Metal Oxide R736 VRS-CZ1JF102JY 1/16W Metal Oxide R609 VRS-CZ1JF332JY 3.3k 1/16W Metal Oxide R737 VRS-CZ1JF332JY 3.3k 1/16W Metal Oxide R610 VRS-CZ1JF222JY 2.2k 1/16W Metal Oxide R738 VRS-CZ1JF102JY 1/16W Metal Oxide...
  • Page 96 VL-MC500S/H/E Ref. No. Part No. Description Code Ref. No. Part No. Description Code R955 VRS-CZ1JF000JY 1/16W Metal Oxide R1728 VRS-CZ1JF152JY 1.5k 1/16W Metal Oxide R956 VRS-CZ1JF102JY 1/16W Metal Oxide R1912 VRS-CZ1JF105JY 1/16W Metal Oxide R957 VRS-CZ1JF333DY 33k 1/16W Metal Oxide R1913 VRS-CZ1JF105JY 1/16W Metal Oxide...
  • Page 97 VL-MC500S/H/E Ref. No. Part No. Description Code Ref. No. Part No. Description Code R3421 VRS-CZ1JF183JY 18k 1/16W Metal Oxide R4472 VRS-CZ1JF152DY 1.5k 1/16W Metal Oxide R4485 VRS-CZ1JF224JY 220k 1/16W Metal Oxide R3422 VRS-CZ1JF151JY 150 1/16W Metal Oxide R3423 VRS-CZ1JF182JY 1.8k 1/16W Metal Oxide R4486 VRS-CZ1JF224JY 220k 1/16W Metal Oxide...
  • Page 98 VL-MC500S/H/E Ref. No. Part No. Description Code Ref. No. Part No. Description Code P1200 QPLGN1475TAZZY Plug, 14Pin C2518 VCKYCZ1HB102KY 1000p 50V Ceramic RMC701 RRMCU0021TAZZY Remote Receiver C2519 VCKYCZ1AB104KY 10V Ceramic SC900 QCNCW2080TAZZY Connector, 20Pin C2520 VCCCCZ1HH151JY 150p 50V Ceramic SC1201 QSOCN3311TAN1Y Socket, 33Pin C2521 VCKYCZ1HF103ZY...
  • Page 99 VL-MC500S/H/E Ref. No. Part No. Description Code Ref. No. Part No. Description Code SC1002 QCNCWA040WJZZY Connector, 27Pin DUNTKB325QA00 SC2501 QSOCN2090TAZZY Socket, 20Pin INVERTER PWB UNIT TRANSISTOR DUNTKB324QA02 Q9801 VSCPH5504++-1Y CPH5504++ CARD PWB UNIT COIL AND TRANSFORMER L9801 RCiLP0349TAZZY Coil, 33µH INTEGRATED CIRCUIT å...
  • Page 100 VL-MC500S/H/E Ref. No. Part No. Description Code Ref. No. Part No. Description Code VCKYCZ1CB103KY 0.01 16V Ceramic P102 QPLGN1474TAZZY Plug, 14Pin VCKYCZ1CB103KY 0.01 16V Ceramic RMC91 RSNSG0012CEZZ Gyro Sensor VCKYCZ1CB103KY 0.01 16V Ceramic SC101 QCNCWA040WJZZY Connector, 27Pin VCKYCZ1HB102KY 1000p 50V Ceramic VCSATA1AJ106MY 10V Tantalum VCSAPR1AJ475MY...
  • Page 101 VL-MC500S/H/E Ref. No. Part No. Description Code Ref. No. Part No. Description Code R316 VRS-CZ1JF473J 47k 1/16W Metal Oxide MECHANISM PARTS R317 VRS-CZ1JF563J 56k 1/16W Metal Oxide R318 VRS-CZ1JF513J 51k 1/16W Metal Oxide R319 VRS-CZ1JF182J 1.8k 1/16W Metal Oxide LCHSM0181GEZZ Main Chassis Ass’y R320 VRS-CZ1JF182J...
  • Page 102 VL-MC500S/H/E Ref. No. Part No. Description Code Ref. No. Part No. Description Code MSPRP0185GEZZ PB Guide SPR. CABINET PARTS LIST LX-WZ1071GE02 CW ø 0.7 ø 1.8t0.1 LX-WZ1104GE06 CW ø 0.7 ø 2.2t0.25 LX-WZ1029GE00 CW ø 1.2 ø 3t0.25 TLABMA129WJZZ Model Label(MC500S) LZ-WZ1105GE00 W ø...
  • Page 103 VL-MC500S/H/E Ref. No. Part No. Description Code Ref. No. Part No. Description Code CANGKA021WJ01 KS LCD Earth Plate CAMERA UNIT PARTS LIST 14-2 PSHEP0228TAZZ LCD Isolating Sheet CHLDZA015WJ01 KS LCD Holder PLNSAA001WJN1 Lens 15-2 PSHEPA013WJZZ LCD Fixing Tape LANGKA027WJFW Lens Fixing Angle DUNTKB321QA02 MAIN PWB Unit —...
  • Page 104 VL-MC500S/H/E Ref. No. Part No. Description Code Ref. No. Part No. Description Code SUPPLIED ACCESSORIES PACKING PARTS (NOT REPLACEMENT ITEM) ACCESSORIES å QACCB0016TAZZ AC Cable(MC500H/W) SPAKCA178WJZZ Packing Case(MC500S/R) — å QACCK0006TAZZ AC Cable(MC500S/E/R) SPAKCA180WJZZ Packing Case(MC500H) — å QACCL0026TAZZ AC Cable(MC500X) SPAKCA181WJZZ Packing Case(MC500E/X) —...
  • Page 105 VL-MC500S/H/E MECHANISM CHASSIS EXPLODED VIEW Ref. No. Part No. Description Code Ref. No. Part No. Description Code 411~ 411~ +0.5 +0.5...
  • Page 106 VL-MC500S/H/E LENS UNIT EXPLODED VIEW Ref. No. Part No. Description Code Ref. No. Part No. Description Code 12-6 11-6 12-4 12-3 12-2 11-2 12-5 11-4 9-13 9-10 11-3 9-11 11-5 9-14 10-8 9-15 10-14 10-5 10-6 10-9 10-16 10-10 10-7 10-15 10-3 10-12...
  • Page 107 VL-MC500S/H/E CABINET EXPLODED VIEW Ref. No. Part No. Description Code Ref. No. Part No. Description Code 6-19 6-18 15-2 6-17 14-2 1-11 6-16 6-16 6-16...
  • Page 108 VL-MC500S/H/E CASSETTE CONTROL EXPLOOD VIEW Ref. No. Part No. Description Code Ref. No. Part No. Description Code 4±0.5 8.5±0.5 CAMERA UNIT EXPLOOD VIEW...
  • Page 109 VL-MC500S/H/E VL-MC500S/H/E SERVICE JIG SPECIFICATIONS Ref. No. Part No. Description Code Ref. No. Part No. Description Code 1-1. Adjusting jigs for checking the mechanism Name New part Type number, Application Part code Code PB-use cassette torque meter 1mN·m/1.5mN·m 9DASD-1015 Torque gauge For use in VS-REW take up torque adjustment JiGTG0045 Torque gauge head For use with the above torque gauge...

  • Page 110: Packing Of The Set

    VL-MC500S/H/E 17. PACKING OF THE SET Ref. No. Part No. Description Code Ref. No. Part No. Description Code No.4 No.18 No.9 No.2 H/W/X model No.15 No.16 No.3 No.1 No.14 No.6 No.8 No.5 No.7 S/E/R model No.13 No.1 No.24 No.22 No.25 No.28 No.27 No.10, No.11, No.12,...
  • Page 111 Code Ref. No. Part No. Description Code COPYRIGHT C 2002 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Vl-mc500sVl-mc500e

Table of Contents