Quick Operation Guide - Sharp ViewCam VL-NZ100S Operation Manual

Quick Operation Guide

Please consult this operation manual
further for details on these and other
functions of your camcorder.
Attaching the Battery
Pack
1
Make sure that the Power
switch is set to OFF.
2
Align the = mark on the side of the
battery pack with the = mark on the
camcorder (1), and slide the battery
pack in the direction of the arrow
completely until it locks into place (2).
i
Charging the Battery
Pack
1
Attach the battery pack on the
camcorder, and make sure that the
Power switch is set to OFF.
2
Connect the supplied power cord to the
Power switch
AC power socket on the AC adapter, and
insert the AC plug into a power outlet.
3
Insert the DC plug into the DC input
jack.
• The charge indicator lights up.
• The charge indicator turns off when the
4
Remove the DC plug from the DC input
jack, then remove the AC plug from the
power outlet.
AC power socket
To power
DC input jack
Charge indicator
battery is charged.
outlet