Using The Menu Screen - Sharp ViewCam Slim VL-ME100S Operation Manual

Summary of Operations
Summary of Operations

Using the Menu Screen

The menu screen can be used to adjust the
various settings of the camcorder.
1
Open the LCD monitor and adjust the
angle (see page 21).
2
Set the camcorder to the desired
camcorder mode (see page 28).
• In TAPE-VCR mode, the mode screen
appears after the POWER switch is set
to VCR. Proceed to step 4.
3
Touch any point on the LCD screen to
display the mode screen.
• In CARD-VCR mode, first display a still
image in full-screen (see page 91), and
then touch any point on the LCD screen
to display the mode screen.
4
Touch the page indicator until the mode
screen with the [MENU] on-screen
button appears, and then touch [MENU]
to display the menu screen.
Example
1 / 2 D I
2 / 2
F ADE SRCH
GAMMA
MENU
E F F .
QU I CK
R T RN
5
Touch [K] or [L] to select the desired
menu, and then touch [SET] to set the
selected menu.
CAME RA S E T
31
6
7
D I SP
AU T O
3 0min 6 0 min 6 0min
To turn off the menu screen
Touch [RETURN] until the menu screen turns
off.
Notes:
Example
• Certain menu items are common among the
P HO T O SNAP PHO T O SHO T
MULT I F RAME
DG T L Z OOM
T AP E SP E E D
1 6 : 9
• The menu items are displayed in yellow when the
RE T URN
S E T RE -
TURN
• The menu screen automatically turns off if no
• The example screens in this operation manual
Touch [K] or [L] to select the desired
menu item, and then touch [SET].
• The available settings for the selected
menu item are displayed.
C AME RA S E T
PHO TO SNAP
MULT I F R AME
DG T L Z OOM
T A P E SP E E D
1 6 : 9
R E T URN
Touch [K] or [L] to select the desired
menu setting, and then touch [SET].
• The selected menu setting is set.
CAME RA S E T
PHOTO SNAP
MULT I F RAME
DG T L ZOOM
T AP E SP E E D
1 6 : 9
RE T URN
• To adjust another menu item, touch
[RETURN] until the camcorder returns to
the status in step 5 or 6, and then repeat
the procedure from that point.
camcorder modes. If the DISPLAY menu item, for
example, is set to "DATE+TIME" in TAPE-VCR
mode, it will be automatically set to
"DATE+TIME" in other modes.
corresponding functions are selected. The menu
items are displayed in gray when the corre-
sponding functions cannot be selected.
settings are made within 5 minutes.
are for explanation purposes, and may differ
slightly from the actual screen displays.
Example
S P
L P
S E T RE -
TURN
Example
L P
S E T RE -
TURN