Quick Operation Guide; Attaching The Battery Pack - Sharp ViewCam Slim VL-AX1S Operation Manual

Quick Operation Guide

Please consult this operation manual
further for details on these and other
functions of your camcorder.
Charging the Battery
Pack
1
Connect the supplied power cord to the
AC power socket on the AC adapter/
battery charger, and insert the AC plug
into a power outlet.
• The POWER indicator lights up.
POWER indicator
2
Align the mark on the battery pack
with the mark on the charger ( ) and
guide the battery into the groove.
Pressing the battery ( ), slide it in the
direction of the arrow ( ) until it locks
into place.
• The CHARGE indicator lights up.
CHARGE indicator
• The CHARGE indicator turns off when
the battery is fully charged.
3
Slide the battery pack in the direction of
the arrow ( ), and remove it ( ). Then
remove the AC plug of the power cord
from the power outlet.
i
AC power socket
To power
outlet
Attaching the Battery
Pack
1
Make sure that the POWER switch is set
to OFF.
2
Pull out the viewfinder completely ( ),
then lift it up ( ).
60˚
3
Align the mark on the side of the
battery pack with the
camcorder ( ). Press the battery pack
and slide it down completely until it locks
into place ( ).
mark on the