Selecting The Audio Playback Mode - Sharp ViewCam Slim VL-ME100S Operation Manual

Advanced Features
Playback
Selecting the Audio Playback
Mode
Available mode: TAPE-VCR
You can select any of the following audio
playback modes to listen to the dubbed audio.
Audio 1+2
• 12-bit audio recording in stereo (Audio 1 and
Audio 2 channels)
• 16-bit audio recording in stereo (left and right
channels)
Audio 1
• 12-bit audio recording in stereo (Audio 1
channel only)
• 16-bit audio recording in mono (left channel
only)
Audio 2
• 12-bit audio recording in stereo (Audio 2
channel only)
• 16-bit audio recording in mono (right channel
only)
1
Play back a Mini DV cassette with
dubbed audio.
2
Touch [1/3] until the [3/3] screen
appears.
• The audio playback mode indicator is
displayed.
1 / 3 D I 3 / 3
AUD I O
/
I NDE X
MENU
81
3
Note:
• The audio playback mode indicator, "AUDIO", is
Audio playback
mode indicator
D I SP
AUD I O 1 + 2
6 0min
Touch [AUDIO] to select the desired
audio playback mode.
• Each time you touch [AUDIO], the audio
playback mode indicator changes as
shown.
3 / 3 D I SP
AUD I O
I NDE X
AUD I O2
displayed in different colours depending on the
audio recording mode (12- or 16-bit) used for the
recording being played back. A white display
indicates 12-bit audio recording mode, and a
green display, 16-bit audio recording mode.
AUD I O 1 + 2
AUD I O 1 + 2
AUD I O 1