Quick Operation Guide; Attaching The Battery Pack - Sharp ViewCam VL-NZ50U Operation Manual

Quick Operation Guide

Please consult this operation manual
further for details on these and other
functions of your camcorder.
Attaching the Battery
Pack
1
Make sure that the Power
switch is set to OFF.
2
Align the = mark on the side of the
battery pack with the = mark on the
camcorder (1), and slide the battery
pack in the direction of the arrow
completely until it locks into place (2).
v
1
2
Power switch
To power outlet
3
Charging the Battery
Pack
Attach the battery pack on the
camcorder, and make sure that the
Power switch is set to OFF.
Plug the AC adapter into a power outlet
(1), then insert the DC plug into the DC
input jack (2).
• The charge indicator lights up.
DC input jack
Charge indicator
• The charge indicator turns off when the
battery is charged.
Remove the DC plug from the DC input
jack, then remove the AC adapter from
the power outlet.