Sharp ViewCam Slim VL-ME100S Operation Manual page 27

Displayed
for 5 seconds
The card is not inserted or is inserted incorrectly. Check how the card is
inserted (see page 15).
(Displayed throughout)
The capacity of the card is full and cannot store any more images. Delete
MEMORY CARD
unnecessary images (see pages 93 and 94) or replace the card with a new
FUL L
one (see page 15).
NO DA T A ON
The card has no images recorded in the format the camcorder can
MEMORY C ARD
recognize.
The images in the card are corrupted or recorded in a format which is not
MEMORY CARD
compatible with this camcorder. Format the card to use it with this
ERROR
camcorder (see page 90).
F ORMA T
The card has not been formatted with this camcorder. Format the card (see
MEMORY CARD
page 90).
MEMORY CARD
The card is write-protected (see page 109).
PROT E C T ED
DA T A
You are trying to delete a protected image. Cancel the protection setting to
PROT E C T ED delete the image (see page 92).
The selected image cannot be read by this camcorder. Format the card to
MEMORY CARD
use it with this camcorder (see page 90).
RE AD ERROR
The card cannot record any data due to a problem with the card or data on
CANNOT
the card. Replace the card (see page 15).
S TORE DA T A
The ID of the card and the tape do not match for Index Playback, or no
DA T A NOT
index is recorded on the card. Insert a card with the indices for the tape in
F OUND
question or record indices and then perform Index Playback (see
pages 73 and 74).
Note:
• indicates a flashing display.
Description of warning
10