Inserting And Removing A Card - Sharp ViewCam Slim VL-ME100S Operation Manual

Preparation
Inserting and Removing a
Card
This camcorder accepts an SD Memory Card
(commercially available) or a MultiMediaCard
(supplied) for storage of still images.
Inserting a Card
1
Make sure that the POWER switch is set
to OFF.
2
Hold the camcorder as shown in the
figure, and slide the card slot cover
release in the direction of the arrow.
• The card slot cover is opened.
3
Insert a card into the slot with the label
facing upwards and the chipped corner
facing the lens, and then push it in as far
as it will go.
4
Close the card slot cover.
15
Removing a Card
1
2
Card slot cover
release
3
Notes:
• The supplied MultiMediaCard is preformatted for
• See pages 108 and 109 for detailed information
Caution:
• Do not remove the card from the camcorder
Chipped
corner
Label
Perform steps 1 and 2 of "Inserting a
Card".
Push the centre of the card edge in to
release the card.
Pull the card straight out.
immediate use.
on the use of MultiMediaCards and SD Memory
Cards.
while data is being recorded on the card (the O
indicator flashes on the screen), as this may
result in deletion of images on the card or
damage to the card itself.