Quick Operation Guide; Turning The Power On; Attaching The Battery Pack; Turning The Power Off - Sharp ViewCam VL-WD255U Operation Manual

Quick Operation Guide

Please consult this operation manual
further for details on these and other
functions of your camcorder.
Charging the Battery Pack
1
Connect the supplied power cord to the
AC power socket on the AC adapter/
battery charger, and insert the AC plug
into a power outlet.
2
Align the s mark on the battery pack
with the a mark on the charger (1) and
guide the battery into the groove.
Pressing the battery (2), slide it in the
direction of the arrow (3) until it locks
into place.

Attaching the Battery Pack

1
Make sure that the Power switch is set
to OFF.
2
Lift up the viewfinder.
3
Align the - mark on the side of the
battery pack with the q mark on the
camcorder (1), and slide the battery
pack down completely until it locks into
place (2).
v

Turning the Power on

Media Selection switch
To use the camera recording
functions, hold down the Lock
button and set the Power switch to
CAMERA.
To use the playback and editing
functions, hold down the Lock
button and set the Power switch to
VCR.
Switching the Media
To use a mini DV cassette for
recording and playing back
images, set the Media Selection
switch to TAPE.
To use a SmartMedia card for
recording and playing back still
images, set the Media Selection
switch to CARD.

Turning the Power off

Set the Power switch to OFF
without pressing the Lock button.
Power switch
Lock button
Lock button