Setting Direct Upload - Ricoh RDC-i500 Operation Manual

Setting Direct Upload

Direct upload refers to dialing the office computer (server) and sending files
directly from the camera to a folder in the server. This section explains how to
set the dial-up account and server name used for direct upload.
• The modem connected to the server will be called up as a matter of fact.
Note
Setting Direct Upload
Direct Upload Settings
The following 3 items are set in this section.
Dial-Up Account
Choose the dial-up account for direct upload from the list of accounts
registered beforehand.
• If the dial-up account has not been registered, register it first.
Note
"Items for Dial-Up Setting (Direct Upload)"
Destination Server
The server (the receiving server) to which the file will be sent. (Example:
ftp.testnet.com or xxx.xxx.xxx.xxx) Leave blank for normal use.
Destination Folder
Specify the folder in a server to which the file will be sent. Leave blank for
normal use.
<For Windows>
If you specify the folder, the file will be sent in the following way depending on
whether you specify the folder both in the receiving computer and in the camera.
(Example: c:/xxxx/xxxx)
Receiving computer
Folder specified Folder specified
Yes
Yes
No
No
*1 When there is no folder specified in the computer, a folder will automatically
be created in the computer.
*2 When there is no folder specified in the computer, the error messages will
be displayed on the LCD monitor of the camera and the file will not be sent.
Camera
The file will be sent to the folder specified in
No
the receiving computer.*1
The folder specified in the camera will be
ignored and the file will be sent to the folder
Yes
specified in the receiving computer.*1
The file will be sent to the folder specified in
Yes
the camera.*2
The error messages will be displayed in the
No
camera and the file will not be sent.
P.24
Result
2
47