Setting A Dial-Up Account; Setting A New Dial-Up Account - Ricoh RDC-i500 Operation Manual

Setting a Dial-Up Account

This section explains how to set the telephone number, server name, etc. for
accessing the Internet.
• If you want to connect directly to an office computer (server) and
Note
perform a Direct Upload, set the telephone number, server name, etc.
in the same way.
• You can also set or edit a dial-up account with your PC.
Account Settings" in the 'Connecting to a Personal Computer'
operation manual.

Setting a New Dial-Up Account

You can set and add new dial-up accounts to the list.
Items for Dial-Up Setting
(Quick Send, E-Mail, FTP Upload)
The following 9 items need to be set.
The setting procedure is explained later.
Dial-Up Name
This is the name of the connection. You can input simple names at will. In
general, the input name is the name of the provider or the access point.
(Example: testnetTokyo)
Telephone Number
This is the telephone number of the connection. Choose the nearest telephone
number from the list of access points provided and input the number. The
hyphenation "-" is not always needed. (Example: xxx-xxx-xxxx or xxxxxxxxxx)
• It is recommended if you often travel on business, prepare a dial-up
Note
setting for each destination.
• If you use a digital mobile phone, depending on the combination of
phone type and provider, you may have to use PTE (protocol transfer
equipment). For information concerning PTE and instructions on
setting the telephone number, see the instruction manual attached to
the communication card.
24
P.27 ~
P.29 ~
"Dial-Up