Ricoh RDC-i500 Operation Manual page 59

Connecting Operation
• Make sure that the camera is turned off before inserting the
Important
Note
communication card in the camera. If the power is left on, it may result
in failure of the communication card or malfunction of the camera.
A Remove the telephone connection
cable (modular cable) from the
modular jack on the wall.
• If the connection jack for the telephone
Note
is not a modular jack, it will need to
be converted to a modular jack.
Contact your telephone company for
further details.
B Check that the camera is turned off.
C Insert the communication card into
the CF card slot in the camera.
Make sure that the communication card is
face up and insert it firmly into the slot.
D Insert the connection cable into the
communication card.
• For details of connecting the
Note
connection cable to the
communication card, refer to the
instruction manual supplied with the
communication card.
E Insert the modular cable into the
connector.
Modular cable
3
57