Removing The Communication Card - Ricoh RDC-i500 Operation Manual

Removing the Communication Card

When you have finished communicating, remove the communication card from
the camera.
Important • Make sure that the camera is turned off before removing the
Note
communication card from the camera. If the power is left on, it may
result in failure of the card or malfunction of the camera.
A Check that the camera power is
turned off.
B Remove the connection cable from
the communication card.
• For details of how to remove the
Note
cable, refer also to the instruction
manual supplied with the
communication card.
C Push the EJECT lever.
The EJECT lever will pop out.
D Push the EJECT lever straight.
The communication card will be pushed out a
little way.
E Remove the communication card by
pulling it straight out.
• Push the EJECT lever to return it to
Note
its original position.
Important • Do not remove the communication card from the camera during
Note
communication as this may result in failure of the card.
3
59