Sending An Image Using Quick Send - Ricoh RDC-i500 Operation Manual

Sending an Image Using Quick Send

Quick send is used to send an image by mail to the same destination.
Important • Before using the quick send function, you must set the destination and
Note
image size in advance.
A Check that the image you want to send has been selected.
• P.65 "Selecting an Image"
See
B Select [QUICK SEND] and press the
button.
• The following steps can not be
Important
Note
performed when the communication
card is not inserted into the card
slot.
C Check the Send to address and the
image size, and press the ENTER
button.
• Press the CANCEL button to cancel
Note
upload.
• When the file size exceeds the memory size for processing the file,
Important
Note
error message will be displayed. Remedy it referring to the lists of
troubleshooting.
A connection to the Internet will be
established and the connection status will be
displayed.
• To cancel the connection, press the
Note
CANCEL button.
68
P.43 "Setting Quick Send"
P.113 "Troubleshooting"