Transferring The Html Template Files From A Pc To The Camera - Ricoh RDC-i500 Operation Manual

Transferring the HTML Template Files from a PC to the Camera

This function allows you to read the HTML template files supplied with the CD-
ROM and transfer them to the camera.
A Check that the camera and PC are properly connected, that the
camera and the PC are turned on, and that the camera's mode dial
is set to [
• Configure the PC to use the HTML template files on a PC. Instructions
Note
for using the PC with the HTML template files are given in Chapter 1
"Getting Started" in 'Connecting to a Personal Computer' operation
manual.
B Insert the CD-ROM into the CD-ROM drive of the PC.
C Start up the browser by the PC, input the IP address and display
the camera's homepage.
• "Opening the Camera's Homepage on the Browser" in the 'Connecting
See
to a Personal Computer' operation manual
D Click on [JOB NAVI. FUNC. SETTINGS].
The list of the Guide lists will be displayed.
E Click on [HTML TEMPLATE].
100
].