Setting Ftp Upload - Ricoh RDC-i500 Operation Manual

Setting FTP Upload

You can upload an HTML file in which an image is embedded and its original
images to the server where the Web page is saved. This section explains how
to set the dial-up account and server name for uploading.
Setting FTP Upload
FTP Upload Settings
The following 6 items are set in this section.
FTP Server Address
Specify the server to which the file is to be sent. (Example: ftp.testnet.com or
xxx.xxx.xxx.xxx)
Destination Folder
Specify the folder to which the file is to be sent. (Example: /xxxx/xxxx)
• Take care to specify the folder in the server correctly. Incorrect input of
Important
Note
the folder will result in an error as the folder will be deemed not to
exist.
User Account
The user account is used for connecting to the FTP server, which is the FTP
upload destination. In some cases it is the same as the PPP account in the dial-
up setting. (Example: testname)
Password
The password is used when connecting to the server. In some cases it is the
same as the PPP password in the dial-up setting. (Example: 1234ABCD)
Dial-Up Account
Choose the dial-up account to be used for actually uploading the HTML file
from the list of accounts registered in advance.
Homepage URL
Specify the URL of the Web site for uploading the HTML file. The specified URL
will be recorded in a mail message to be created after uploading of the HTML
files. (Example: http://www.testnet.com/~testname)
• P.106 "Uploading an HTML File/Note"
See
50