Ricoh RDC-i500 Operation Manual page 47

C Press the ENTER button.
The selected dial-up account will be displayed on the Quick Send Address
Setup screen (Step A).
• If the dial-up account has not been registered, register it first.
Note
"Setting a Dial-Up Account"
Setting an Image Size
This function enables you to set the size of the image to be sent. Choose the
appropriate size according to whether you want to give priority to image quality
or to speed.
• Images saved in Text mode will be sent in its original image size, even
Important
Note
when you change it.
A Select [IMAGE SIZE] from the Quick
Send Setting screen and press the
button.
The image size setting screen will be
displayed.
B Choose the image size you want to
set and press the ENTER button.
Setting will be completed and the image size
you selected will be displayed on the Quick
Send Setting screen.
NO CHANGE
You can send the image in its original size.
Select this function when you wish to give
priority to image quality.
1/2, 1/3, 1/6, 1/12
You can send the image by resizing it to between 1/2 and 1/12 of its original size.
Select this function when you wish to give priority to speed rather than quality
when sending an image. The smaller the image size, the shorter the time to send.
1/2 1/3 1/6
P.24
1/12
2
45