Creating An Html File - Ricoh RDC-i500 Operation Manual

The selected HTML template file will be transferred to the camera.
To transfer more HTML files, repeat Steps G to I.

Creating an HTML File

Embed a recorded image file in an HTML template to create an HTML file. You
can then upload the resultant file to a Web page directly.
Important • The card slot will be occupied with the communication CF card. You
Note
can not upload the HTML file stored in the CF card.
When creating an HTML file, be sure to do so by storing (copying)
both the HTML file and embedded images in the internal memory,
because the embedded images will be stored in the same storage
memory as the HTML file.
A Set the mode dial to [
B Press the
source memory (CF CARD/IN) where
the file to be embedded is stored.
• When the communication CF card is
Note
set in the card slot, selecting the
source memory is not available.
C Press the [FOLDER] button to select a
folder in which images are recorded.
• "Selecting a Folder" in the 'Camera'
See
operation manual
102
].
button to select the