Ricoh RDC-i500 Operation Manual page 27

Dial Type
If you are using an ordinary telephone line, choose the type of line. Select
either TONE or PULSE. The factory default setting is TONE. If you are using a
mobile phone, leave the setting on TONE.
• TONE : Short beeps are heard when dialing
• PULSE : Long beeps are heard when dialing
• If the type of telephone line is not correctly set, no connection will be
Note
made. If you do not know which type of telephone line you use,
contact the telephone company.
External Call
When making an external call from an internal phone of the office, input
numbers from 0 to 9 to set the external call number. When the external call
number is set, it is added in front of the telephone number and dialed before the
telephone number. If you do not need an external call number, leave blank.
PPP Account
This is the account name (the name of the contractor) for accessing the
Internet. It is also called User name, User ID, etc. (Example: testname)
PPP Password
This is the password for accessing the Internet. Input the password in letters.
(Example: 1234ABCD)
Important • Take note of the following when entering the account and password.
Note
* the difference between uppercase and lowercase letters
* the difference between the number "0" (zero) and the alphabet letter
"O"
* the difference between the number "1" (one) and the alphabet letters
"I" (capital i) and "l" (small L).
• Your password is very important. Make a note of your password and
keep it safe, out of sight.
Primary Name Server
Secondary Name Server
This is the IP address of the name server managed by your provider or system
administrator. (Example: xxx.xxx.xxx.xxx)
Important • The internet function does not work properly unless you specify the
Note
name server. Be sure to specify the name server.
• The primary name server is the server you normally use. If this server
Note
fails to function, the secondary name server will be used as an
emergency server.
2
25