Table of Contents
Advertisement
Setting DPOF (Direct Print of File)
DPOF is a special feature built into your camera that allows you to assign information
to your images for use by digital printing services, desktop printers that accept memory
cards or devices that allow direct to print from your camera. By assigning DPOF
information to an image, you may designate the quantity of images you wish to have
printed or have an index of selected images printed directly from the memory card or
image file.
When submitting recorded images to digital printing services or other applications, set
the number of copies of the images to print and that of copies of the index. This setting
is possible only when you select the RICOH folder.
Setting a Print Service
When having prints made by a digital print service, set the number of prints and
number of indexes.
Note
• Only the files in the Ricoh folder can be set for print service.
• Leave enough space for 1 - 2 prints on the smart media so the print
service settings can be saved.
• After making the print service settings, do not change the record, erase,
etc., settings. If this is done, reset playback.
q Rotate the mode dial to [
the CARD/IN button to select [ ].
w Press the MENU button.
The playback menu will be displayed.
Note
• Press the MENU button to cancel the
operation.
e Press the ▼ and ▲ buttons to select
[DPOF] and then press the ENTER
button.
The Setting menu will be displayed.
• Specify the number of prints.
• Specify the number of indexes.
• Cancel the DPOF settings.
] and press
P.88
P.89
P.90
4
87
Advertisement
Table of Contents
