Setting Quick Send; Setting Operation - Ricoh RDC-i500 Operation Manual

Setting Quick Send

The quick send function is useful for sending an image quickly through the Play
mode. It is useful for sending a specified image to the same destination. In
order to use this function, you need to set the destination and dial-up account
beforehand.
• P.24 "Setting a Dial-Up Account", P.33 "Setting the E-Mail Function"
See
and P.38 "Registering an Address in the Address Book"

Setting Operation

Quick send enables you to send an image using the e-mail function. This
section explains how to set the mail destination and dial-up account.
A Set the mode dial to [SET].
The Setup menu will be displayed.
B Select [COMMUNICATION SETTINGS] and press the
The communication settings menu will be displayed.
C Select [QUICK SEND] and press the
button.
The quick send setting screen will be
displayed.
D Enter the quick send settings.
Details of the setting procedure are explained
later.
• Selecting an Address Using the Address
Book P.44
• Selecting a Dial-Up Account
• Setting an Image Size
E When you have finished entering the
quick send settings, press the ENTER
button.
The screen will return to the communication
settings menu.
F Press the CANCEL button.
The screen will return to the Setup menu.
P.44
P.45
2
button.
43