Interrupting A Copy Job - Xerox 6204 User Manual

Interrupting a Copy Job

You can interrupt a continual copy or print job for an urgent copy job. The feature
settings for the current copy job are saved without change.
Note
1
Press the <Interrupt> button on the control
panel.
The <Interrupt> indicator is blinking. It indicates the
interrupt has been requested. The current processing job is
suspended.
When the interrupt is ready, the <Interrupt> indicator is lit.
2
When the suspended job is stopped, the [Menu]
screen appears. Select [Copy].
Note
3
Select the settings such as the magnification
percent for the new job to be processed during
the interruption.
4
Enter the required number of copies (1 to 99)
using the numeric keypad.
5
Set the original in alignment with the original guide.
For information about the procedure to set the original, refer to "Step 3 Scanning the Original" (P.43).
6
When the new job (interrupt job) is completed, press the <Interrupt>button again.
The interrupt mode is cancelled, and the suspended job restarts.
Note
Xerox 6204 Wide Format Solution
• The following operations are disabled during interruptions.
Interrupting the copy job for another copy
Copying from the memory
• The collated output is disabled during interruptions.
• You cannot interrupt a scan job for a copy job.
• When the suspended job was copying, the
[Copy] screen appears without displaying the
[Menu] screen.
• The interruption mode will be automatically canceled after 30 seconds has elapsed without
copy operation.

Interrupting a Copy Job

Copy from
Transmitting
Copy Scan Menu
Jobs in Memory
Original/
Media Settings
1
2 3
Interrupt
Machine Status 4 5 6
7 8 9
Log In/Out
.
0 C
<Interrupt> button
Menu
Copy
Scan
Basic Copy Image Quality More Features
Reduce / Enlarge Media Supply Media Type
Auto
100.0%
Select
1 A0
Auto %
Bond
50.0% 2 A1
Bond
A0 A2
More... More...
Memory
Power Saver
Clear All
Stop
Start
3
Bond
Vellum
Film
Media Cut Mode
Standard
49