Xerox 6204 User Manual page 181

Symptoms
White dots Is the correct type of paper
appear in black media used?
filled areas.
Internal components are
dirty.
Printed toner Is the paper media damp?
smudges when
rubbed with your
finger.
Is the correct type of paper
Toner is not
media used?
fused to the
paper.
Are the media settings
The paper is
correct?
dirtied with toner.
The entire paper A probable cause is an
area is printed internal machine error.
black.
Nothing is A probable cause is an
printed. internal machine error.
Part of the image Was the correct media
is "lost" on the series used? Does the
edge of paper. image exceed the
machine's printable area?
Check
Load a correct type of paper media.
Refer to "Loading Media" (P.34).
Contact your Xerox Customer Support
Center.
Replace with paper media from a new
ream.
Refer to "Loading Media" (P.34).
Load a correct type of paper media.
Refer to "Loading Media" (P.34).
Correctly select the media settings.
Refer to "Media Settings" (P.39).
Contact your Xerox Customer Support
Center.
Contact your Xerox Customer Support
Center.
Decrease the original print area.
Refer to "Specifications" (P.186) "Image loss
width".
Problems during Printing
Remedy
173
10