Naming/Renaming Stored Programming - Xerox 6204 User Manual

5 Stored Programming
2
Select [Copy] or [Scan].
3
The current selections are displayed, and can
be changed if necessary.
4
Press the <Start> button.
Note

Naming/Renaming Stored Programming

This is the procedure for naming and renaming Stored Programming.
Up to 20 characters are allowed in a Stored Programming name.
1
Select the number to name/rename, and select
[Change/Delete].
Note
5
2
Select [Name].
3
Enter the name, and select [Save].
For information about how to enter characters, refer to
"Entering Text" (P.24).
4
Select [Close].
98
• To cancel the registration, press the <Stop> button.
• Select [ ] to display the previous screen and
select [ ] to display the next screen.