Xerox 6204 User Manual page 174

10 Problem Solving
Images on the
copy are
skewed.
Part of the image
is missing on the
copy.
(smudged,
unclear) .
Dirt appears at
equal intervals.
Black dots are
printed.
10
166
Symptoms
Is the original at the correct
position?
Is the paper media loaded
correctly?
Is the original guide at the
correct position?
Is the media tray set
correctly?
Is the paper media damp?
Is the loaded paper media
folded or wrinkled?
Dirt on the paper feed path.
Internal components are
dirty.
Internal components are
dirty.
Check
Set the original correctly.
Refer to "Step 3 Scanning the Original" (P.43).
Load the paper media correctly.
Refer to "Loading Media" (P.34).
Correctly set the original again, and align
the edge of the original with the original
guide.
Refer to "Step 3 Scanning the Original" (P.43).
Firmly push in the media tray to set it
correctly.
Refer to "Loading Media" (P.34).
If the paper media is damp, either some
parts of the copy are not shown or the copy
is smudged and unclear. Replace with
paper media from a new ream.
Refer to "Loading Media" (P.34).
Remove the defective paper media and
replace with paper media from a new ream.
Refer to "Loading Media" (P.34)..
Copy a few pages.
Contact your Xerox Customer Support
Center.
Contact your Xerox Customer Support
Center.
Remedy