Multi-Part Forms - Epson LQ-300 User Manual

Multi-part forms

You can use the built-in tractor to print on carbonless
multi-part forms of up to four parts (one original plus three
copies). Before you print on the forms, set the paper-thickness
lever as described in the previous section. These tips will help
you get good results:
Load multi-part forms with the tractor only, not in the
cut-sheet feeder or paper guide. For instructions, see
" Printing on Continuous Paper" on page 2-7.
Use only multi-part forms that are free of wrinkles and
waves. Never load multi-part forms joined by metal
staples, tape, or continuous gluing.
If you need to adjust the loading position, use your
software program or change the loading position as
described on page 2-5.
When you use multi-part forms, raise the paper guide as
shown.
Note:
If you print on multi-part forms without raising the paper guide,
the paper may jam.
Using the Printer
2-19