Table 1-4. Specifications For Single-Sheet Multi-Part Forms; Table 1-5. Specifications For Continuous Paper; Table 1-6. Specifications For Envelopes - Epson LQ-1170 Service Manual

Table 1-4. Specifications for Single-Sheet Multi-Part Forms (Carbonless) (80/1 36 column)
Width
Length
Thickness
Weight
Quality
Copies
Table 1-5. Specifications for Continuous Paper (80/1 36 column)
Width
Thickness
Weight
Quality
Copies
Size
Thickness
Weight
Quality
Copies
NOTES: Printing on envelopes is available only at normal temperatures.
Load envelopes only into the top paper entrance.
Keep the longer side of the envelope horizontal when you insert it.
Place the left edge of a no. 6 envelope at the sheet guide mark.
Label size
Thickness
NOTES: Printing on labels is available only at normal temperatures.
Only use labels on continuous backing paper with sprocket holes for tractor feeding.
Labels with pressure-sensitive paper must be spot pasted beyond the perforation between
the sprocketholes
in.). You can print labels only when the temperature is between 5 and 35 degrees C (4 1
and 95 degrees F) and humidity is between 10YO and 80'%0 RH.
Examples of labels: Avery continuous form labels and Avery mini-line labels
182 to 2 16/364 mm (7.2 to 8.5/1 4.3 in.)
257 to 297 mm (10.7 to 11.7 in.)
0.065 to 0.14 mm (0.0025 to 0.0055 in.) — per sheet
0.12 to 0.64 mm (0.0047 to 0.0256 in.) total
17 to 24 lb (52.3 to 90 g/m2) single sheets
12 to 15 lb (40 to 58 g/m2) each
Carbonless duplicating paper
Four sheets (one original and three copies)
101 to 254/406 mm (4.0 to 10.0/16 in.)
0.065 to 0.10 mm (0.0025 to 0.0039 in.) single sheet
0.065 to 0.32 mm (0.0025 to 0.012 in.) total
14 to 22 lb (52.3 to 82 g/m2) single sheet
12 to 15 lb (40 to 58 g/m2) each
Standard paper or carbonless duplicating paper
4 sheets (1 original and 3 copies)

Table 1-6. Specifications for Envelopes

No. 6 = 166 mm x 92 mm (6.53 in. x 3.62 in.)
No. 10 = 240 mm x 104 mm (9.45 in. x 4.09 in.)
0.16 to 0.52 mm (0.0063 to 0.0197 in.)
Differences in thickness within the printing area must be less
than 0.25 mm (0.0098 in.).
12 to 24 lb (45 to 91 g/m2)
Bond paper, standard paper, air mail
Not available
Table 1-7. Specifications for Labels
2 1/2 in x 15/16 in.
4 in. x 15/16 in.
4 in. x 7/16 in.
0.07 to 0.09 mm (0.0028 to 0.0031 in.) —for the backing paper
0.16 to 0.19 mm (0.0063 to 0.0075 in.) — total
Not available
and the total thickness must be less than or equal to 0.3 mm (0.01 18
1-5
REV.-A