Modular Jack (Mj1 / Mj2) - Fuji Electric FEH300b Hardware User Manual

A screen data transfer cable (MJ1 only), temperature controller, barcode reader, CREC, or V-I/O can be connected to the
modular jack (MJ1 or MJ2).
• For NP5M0101-5H4/4H4
NP5N0011-5H4/4H4
Bottom view
Pins of MJ1 and MJ2 correspond to signals as given below.
MJ1/2
8 7 6 5 4
Note: 1) Allowable current for the external power supply +5V at MJ1/MJ2/USB-A of the @E.Terminal.
• For MJ1 and MJ2, the maximum allowable current is 150 mA in total.
• When connecting an optional unit or communication unit, be careful not to exceed the total allowable current
(650 mA) for USB-A, MJ1 and MJ2.
Pin No.
1
2
3
4
5
6
3 2 1
7
8

2-5 Modular Jack (MJ1 / MJ2)

• For NP5M0101-3H4
NP5N0011-3H4
Bottom view
Signal
+SD/RD
-SD/RD
+5V
+5V
SG
SG
RD
SD
2-17
Contents
RS-485 + data
RS-485 - data
Externally supplied +5 V
(Note: 1)
Signal ground
RS-232C receive data
RS-232C send data