Fuji Electric FEH300b Hardware User Manual page 19

(8) Function performance specifications
Item
Screens
Screen memory
Switch
Switch actions
Lamp
Graph
Data Numerical data display
setting
Character display
Message display
Sampling
Graphic library
Overlap library
Data blocks
Messages
Patterns
Macro blocks
Page blocks
Direct blocks
Screen blocks
Data sheets
Screen library
Comments
Device memory map
Time display
Hard copy
Buzzer
Auto OFF function
Self-diagnostic function
Note: 1) The number of setting memory locations is limited to 1024 per screen.
Note: 2) Layer: 4 per screen (base + 3 overlap displays)
Specifications
Max. 1024
Flash memory: Approx. 12.5 Mbytes (Varies depending on the font)
1024 per screen
Set, reset, momentary, alternate, to light
(Possible to press a function switch and a switch on the display at the same time)
Reverse, blink, exchange of graphics
1024 per screen
Pie, bar, panel meter and closed area graph:No limitation
Statistics and trend graphs: Max. 256 per layer
No limitation
No limitation
Display resolution: 800 x 600: Max. 100 characters (1-byte)
No limitation
Sampling display of buffer data
(Constant sampling, bit synchronization, alarm logging, time order alarming, alarm
function)
Max. 2560
Max. 1024
Max. 1024
Max. 32768 lines
Max. 1024
Max. 1024
Max. 1024
Max. 1024
Max. 1024
Max. 1024
Max. 1024
Max. 32768
Max. 32 x 8 (PLC1 to PLC8)
Provided
Provided
Provided, 2 sounds (short beep, long beep)
Always ON, random setting
Switch self-test function
Communication parameter setting check function
Communication check function
2-5
2-1 Specifications
(Note: 2)