Olu Number Display Command (Stxvgetolu) - Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual

Chapter 8 Commands

8.6 OLU Number Display Command (stxvgetolu)

Title
phase
execute
update
generation
transfer
recovery
Check the status of the copy sessions in the Shadow Copy destination disks that are registered in the
target disk pool management file.
8.6 OLU Number Display Command (stxvgetolu)
This command displays information such as the OLU number and Box ID of the specified ETERNUS
Disk storage systems.
This command can be executed by either a production server or a backup server.
■
Format
"Installation folder"\bin\stxvgetolu [-p physical-disk]
■
Description of options
Option
-p
The copy status is displayed.
copying: copying
tracking: tracking (the copy process has completed)
trackingcopying: tracking (the copy is being processed)
---: suspended by an error, suspended in the hardware
The copy progress is displayed.
nnn%: displayed in percentage
---: other than being copied
The update rate is displayed.
nnn%: While tracking (the copy process has completed) in QuickOPC operation, this
item is displayed in percentage
---: except while tracking (the copy process has completed) in QuickOPC operation
For a SnapOPC+, the generation is displayed.
1 to n: the number of generations
---: operation other than SnapOPC+
The transfer mode type is displayed.
This is not displayed for QuickOPC/SnapOPC+ operation.
---: QuickOPC/SnapOPC+
The setting information of the Recovery mode is displayed.
This is not displayed for QuickOPC/SnapOPC+ operation.
---: QuickOPC/SnapOPC+
Specify a physical disk number.
If omitted, information, such as all OLU numbers and Box IDs of ETERNUS Disk
storage systems that are connected to the executed server, is displayed.
60
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED
Description
Description
P3AM-4582-03ENZ0