Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual page 129

Chapter 9 Messages
9.4 Output Error Messages in Message Box
■
Backup server settings for Transportable Copy Configuration
When the service name "stxvcommunication" has not been registered and the default port number is
used for another service, an unused port number between 49152 and 65535 is used. The port number
to be used is displayed in the following window.
After installing VSSHP in the production server, input the port number that is displayed in the window
above in the following registry.
Registry path name
Production server registry item
HKEY_LOCAL_MACHINE\SOFTWARE\FUJITSU\ETL_VSS
Change the value that is described in the item name "PortNumber".
■
Production server settings for Transportable Copy Configuration
If the IP address of the backup server cannot be found when setting it in the registry, the following
message is displayed.
129
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0