Update Volume Measurement Command (Stxvtestcopy) - Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual

Chapter 8 Commands

8.2 Update Volume Measurement Command (stxvtestcopy)

■
Execution example
●
For registration
C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvprovider"
install
stxvprovider install successfully completed.
C:\>
●
For deletion
C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvprovider"
uninstall
stxvprovider uninstall successfully completed.
C:\>
■
Reference
Use the "vssadmin list provider" command that is provided by the OS to check whether VSSHP has
been registered in VSS.
VSSHP has been registered when the provider name "ETERNUS VSS Hardware Provider" is
displayed.
8.2 Update Volume Measurement Command (stxvtestcopy)
For a SnapOPC+ operation, this command keeps a cumulative total of the amount of source disk
updates that have occurred for the specified physical disk or mount point.
Execute this command on a production server.
■
Format
"Installation folder"\bin\stxvtestcopy start | status | stop
-p source-disk | mount-point
■
Description of options
Option
start
status
stop
-p
Starts measuring the amount of updates.
Outputs the current amount of updates.
Stops measuring the amount of updates.
Specifies a source disk with a physical disk number or mount point.
54
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED
Description
P3AM-4582-03ENZ0