Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual page 69

Chapter 8 Commands
8.9 Target Disk Pool Registration/Deletion Command (stxvsetdiskpool)
■
The input format of the "add" subcommand and "delete" subcommand
Input format
n
n-m
n,m...
all
quit
■
Execution example
C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvsetdiskpool"
VSSHP>add
No. DiskNo.
1 Disk1
2 Disk2
3 Disk3
4 Disk10
5 Disk11
6 Disk12
select disk: 2,5-6
The specified target disks are added.
VSSHP>list
Target disk list
No. DiskNo.
1 Disk2
2 Disk11
3 Disk12
Used target disk list
No. DiskNo.
Specify the target Shadow Copy destination number with a numerical value.
The Shadow Copy destination of the specified number is registered or deleted in the
target disk pool management file.
Specify the range of the target Shadow Copy destination numbers with numerical
values.
The Shadow Copy destinations within the specified range are registered or deleted in
the target disk pool management file.
Specify the multiple target Shadow Copy destination numbers with numerical values.
The Shadow Copy destinations of the specified numbers are registered or deleted in
the target disk pool management file.
All the Shadow Copy destinations are registered or deleted in the target disk pool
management file.
Quits the subcommand.
SDV Size(KB)
4194304
4194304
4194304
SDV 2097152
SDV 2097152
SDV 2097152
SDV Size(KB)
4194304
SDV 2097152
SDV 2097152
SDV Size(KB)
69
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED
Description
MountPoint/DriveLetter
e:\MntPoint\Disk2P1\
MountPoint/DriveLetter
e:\MntPoint\Disk2P1\
MountPoint/DriveLetter
P3AM-4582-03ENZ0