Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual page 83

Chapter 9 Messages
9.1 Event Log Messages
■
Event ID: 583
Type:Information
Messages:STXV0583 INFO EF_PreFinalCommitSnapshots ended.
Details:
ETERNUS VSSHP EF_PreFinalCommitSnapshots ended.
■
Event ID: 585
Type:Information
Messages:STXV0585 INFO [Internal Function Name] started.
Details:
ETERNUS VSSHP [Internal Function Name] started.
■
Event ID: 591
Type:Error
Messages:STXV0591 ERROR Failed to access device. Error code = "internal error code"
Details:
Failed to access device. The process is canceled.
If the "internal error code" is [-1], check the following.
- There is no access to the Shadow Copy destination during backup.
For details, refer to [Caution] in
- The Shadow Copy destination that is registered in the copy set information is connected to the
backup server.
- The setting of the requester must be a server configuration.
For details of server configuration, refer to
- The Shadow Copy destination must be unmounted.
If the "internal error code" is [-3], check the following.
- The Hyper-V Transportable Copy Configuration is used.
Check that the Shadow Copy destination is connected to the production server.
For details, refer to
Virtual Machine)" (page
Execute the backup again when there is no problem.
■ Event ID: 592
Type:Error
Messages:STXV0592 ERROR Failed to obtain device information. Error = "detailed error code"
Details:
Failed to obtain device information. The process is canceled.
Deal with the error according to the contents of the ETERNUS Disk storage systems "detailed error
code", and try again.
For more details about the "detailed error code", refer to
"5.1 Backup" (page
"1.3.1.4 Transportable Copy Configuration (when Backing Up a Hyper-V
21).
83
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED
44).
"1.3.1 Server Configuration" (page
"9.3 Detailed Error Codes" (page
17).
125).
P3AM-4582-03ENZ0