Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual page 85

Chapter 9 Messages
9.1 Event Log Messages
■
Event ID: 1001
Type:Information
Messages:STXV1001 INFO VSS Hardware Provider Communication Server service has started.
PID = [process ID]
Details:
The ETERNUS VSS Hardware Provider Communication Server service has started.
■
Event ID: 1002
Type:Information
Messages:STXV1002 INFO VSS Hardware Provider Communication Server service has stopped.
PID = [process ID]
Details:
The ETERNUS VSS Hardware Provider Communication Server service has stopped.
■
Event ID: 1003
Type:Error
Messages:STXV1003 ERROR "0" is specified for the port number of VSS Hardware Provider
Communication Server service.
Details:
"0" is specified for the port number of ETERNUS VSS Hardware Provider Communication Server
service. The process is canceled.
Check that the port number of the ETERNUS VSS Hardware Provider Communication Server
s e r v i c e
drive:\WINDOWS\system32\drivers\etc\services file.
■ Event ID: 1004
Type:Error
Messages:STXV1004 ERROR An error occurred when creating the communication environment
for VSS Hardware Provider Communication Server service. iReturn = [internal code], errno =
[error number]
Details:
An error occurred when creating the communication environment for the ETERNUS VSS Hardware
Provider Communication Server service. The process is canceled.
Try again in a few minutes. If the problem still persists, refer to
Information" (page
engineer (FE).
( s t x v c o m m u n i c a t i o n )
131), and prepare the required information before contacting a Fujitsu field
85
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED
i s n o t " 0 "
"10.2 How to Obtain Error
i n t h e S y s t e m
P3AM-4582-03ENZ0