Chapter 2 Workflow - Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual

Chapter 2
Workflow
Perform preparation, install VSSHP, and setup the environment according to the following workflow.
Register the Advanced Copy license
Decide the disk type for
shadow copy destination
Decide server configuration
Operation on the ETERNUS Disk
storage system
For an SDV
For a normal volume
Create a volume
(normal volume)
Transportable Copy Configuration
Local Copy Configuration
Install VSSHP
Start backup operation
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED
Install the update volume
Measurement Command
package
Measure the cumulative
amount of updates
Create a volume (SDV)
Install VSSHP in a backup
server
Change the firewall setting
of the backup server
Install VSSHP in a
production server
Operation on
the server
27
"3.1 Advanced Copy License
Registration" (page 28)
"3.2.1 Selection of the
Shadow Copy Destination
Disk Type" (page 30)
"3.2.2 Shadow Copy
Destination Disk Capacity
Estimation" (page 31)
"3.2.3 Volume Creation"
(page 33)
"1.3.1 Server
Configuration" (page 17)
"4.1.1.1 Backup Server"
(page 35)
"4.1.1.2 Production Server"
(page 38)
"4.1.2 Local Copy
Configuration Installation"
(page 40)
"Chapter 5 Operation" (page
44)
P3AM-4582-03ENZ0