Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual page 66

Chapter 8 Commands
8.8 Communication Environment Setup Command (stxvsetcommu)
●
When the service name "stxvcommunication" has not been registered and the default port
number is used for another service
An unused port number between 49152 and 65535 is used. The port number to be used is
displayed in the following window.
Check the port number and select the IP version (IPv4 or IPv6) for VSSHP.
●
For a production server
Select "Production Server".
Set the IP address of the backup server in the communication management file.
●
When the IP address has already been registered
The registered IP version and IP address are displayed. To change the IP address and IP
version, enter a new IP address and IP version.
66
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0