Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual page 127

Chapter 9 Messages
9.3 Detailed Error Codes
out of sequence.
disk drive motor off.
If a detailed error code not shown in this table appears, contact your Fujitsu system engineer (SE). (*1)
*1: Refer to
Detailed error code
"10.2 How to Obtain Error Information" (page
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED
Take one of the following actions:
•
Check the processing status, and then try again.
•
Check the session status, and then try again.
•
For SnapOPC+, check the generation number, and then
try again.
If the error occurs again, contact your Fujitsu system engineer
(SE).
Activate the disk drive motor, and try again.
131), collect the data necessary to solve the error.
127
Action
P3AM-4582-03ENZ0