Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual page 119

Chapter 9 Messages
9.2 Command Messages
■
STXV0803 ERROR Failed to access to services file("event ID")
[Meaning]
Access to the "services" file failed. The process is canceled.
[Action]
Check the "services" file, and try again.
■ STXV0804 ERROR No port number is able to use.
[Meaning]
There is no available port number. The process is canceled.
[Action]
Define the port number of the "services" file in the range of 49152 to 65535. After installing VSSHP in
the production server, input the defined port number in the following registry, and try again.
Production server registry
Key name: HKEY_LOCAL_MACHINE\SOFTWARE\Fujitsu\ETL_VSS
Change the value that is described in the item name "PortNumber".
■
STXV0805 ERROR Access error in VSSHP environment file. Internal code = "internal
code"
[Meaning]
Access to the VSSHP environment file (registry) failed. The process is canceled.
[Action]
Check the registry, and try again.
If the problem still persists, refer to
required information before contacting a Fujitsu field engineer (FE).
■
STXV0806 ERROR An error occurred when creating the communication environment
for VSS Hardware Provider Communication Server service. errno = ["internal code"]
[Meaning]
An error occurred when creating the communication environment for the ETERNUS VSS Hardware
Provider Communication Server service. The process is canceled.
[Action]
When this error occurs at installation, check that the VSSHP package (setup.exe) is executed with the
administrator privilege.
If this error occurs for any other reason, try again in a few minutes.
If the problem still persists, refer to
required information before contacting a Fujitsu field engineer (FE).
"10.2 How to Obtain Error Information" (page
"10.2 How to Obtain Error Information" (page
119
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED
131), and prepare the
131), and prepare the
P3AM-4582-03ENZ0