Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual page 39

Chapter 4 Environment Creation
4.1 New Installation
3
After installation, continue to set the environment. The following window appears.
4
Select "Production server (Transportable copy)" and click the [OK] button.
Set the IP address of the backup server in the communication management file.
When the [Skip] button is clicked, the installation completes without the environment being set.
Set a Shadow Copy destination and communication environment after the installation.
Refer to
The following window appears. Specify the IP version (IPv4 or IPv6) of the backup server, enter
the appropriate IP address, and click the [OK] button.
5
Click the [Finish] button on the "InstallShield Wizard Completed" screen to finish the
installation.
"6.2 When Changing the Communication Environment" (page 48)
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED
39
for details.
End of procedure
P3AM-4582-03ENZ0