Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual page 65

Chapter 8 Commands
8.8 Communication Environment Setup Command (stxvsetcommu)
●
For a backup server
Select "Backup Server".
Perform the communication service (ETERNUS VSS Hardware Provider Communication Server
service) setting.
The service name is registered as "stxvcommunication". Check the port number and set the IP
version.
●
When the port number has already been set with the service name "stxvcommunication"
The set port number is displayed.
●
When the service name "stxvcommunication" has not been registered and the default port
number 50001 is used
The default port number is displayed in the following window.
65
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0