Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual page 109

Chapter 9 Messages
9.2 Command Messages
■
STXV0317 INFO Copy session was stopped. Source-Disk = "physical disk number",
Source-BoxID = "Box ID", Source-OLU = "OLU number", Target-BoxID = "Box ID",
Target-OLU = "OLU number"
[Meaning]
The copy session of "physical disk number" is stopped.
■ STXV0318 ERROR Failed to stop copy session. Source-Disk = "physical disk
number", Source-BoxID = "Box ID", Source-OLU = "OLU number", Target-BoxID =
"Box ID", Target-OLU = "OLU number", Error code = "error number, detailed error
code"
[Meaning]
Failed to stop copy session. The process is canceled.
[Action]
Deal with the error according to the contents of the ETERNUS Disk storage systems "detailed error
code", and try again.
For more details about the "detailed error code", refer to
■
STXV0319 ERROR The VSSHP Management file version is invalid.
[Meaning]
The copy set management file version is invalid. The process is canceled.
[Action]
Check the VSSHP version, and try again.
■
STXV0320 ERROR Insufficient memory.
[Meaning]
Insufficient memory. The process is canceled.
[Action]
Exit all unused programs, and try again.
If the problem still persists, refer to
required information before contacting a Fujitsu field engineer (FE).
■ STXV0325 ERROR An error occurred in the backup server.
[Meaning]
An error occurred in the backup server. The process is canceled.
[Action]
Check the events log message in the backup server and deal with the contents accordingly.
"10.2 How to Obtain Error Information" (page
109
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED
"9.3 Detailed Error Codes" (page
131), and prepare the
125).
P3AM-4582-03ENZ0