Table of Contents
Advertisement
Chapter 8 Commands
8.5 Backup Status Query Command (stxvquery)
8.5
Backup Status Query Command (stxvquery)
This command displays the Advanced Copy status.
Execute this command on a backup server.
■
Format
"Installation folder"\bin\stxvquery
■
Execution example
C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvquery"
id,elapsed-time,kind,source-box-id,source-olu-no,target-box-id,target-olu-no,
status,phase,execute,update,genaration,transfer,recovery
----------------------------------------------------------------------------------
---------------------------------------------------
0x0007,120,QOPC,00E4000M3#####E430S20AU###MP4020738001##,0x0007,00E4000M3#####E430
S20AU###MQ5020739011##,0x001d,executing,copying,8%,---,---,---,---
stxvquery successfully completed.
C:\>
■
Displayed contents
Title
id
elapsed-time
kind
source-box-id
source-olu-no
target-box-id
target-olu-no
status
The session ID of the chassis is displayed.
A hexadecimal number of four digits is displayed with "0x" in front of the hexadecimal
number.
When the OLU number is 1, it is displayed as "0x0001".
The elapsed time from the beginning of the copy is displayed. (unit: second)
The copy type is displayed.
QOPC: QuickOPC
SOPCP: SnapOPC+
The BOX ID of the source disk is displayed.
The OLU number of the source disk is displayed.
A hexadecimal number of four digits is displayed with "0x" in front of the hexadecimal
number.
When the OLU number is 1, it is displayed as "0x0001".
The BOX ID of the Shadow Copy destination is displayed.
The OLU number of the Shadow Copy destination is displayed.
A hexadecimal number of four digits is displayed with "0x" in front of the hexadecimal
number.
When the OLU number is 1, it is displayed as "0x0001".
The session status is displayed.
executing: operating normally
errsuspend: suspended by an error
halt: suspended in the hardware
59
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED
Description
P3AM-4582-03ENZ0
Advertisement
Table of Contents
