Output Error Messages In Message Box - Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual

Chapter 9 Messages

9.4 Output Error Messages in Message Box

9.4 Output Error Messages in Message Box
The following explains error messages in the message boxes that are output by VSSHP.
■ Installation
If VSSHP 1.1.0 or a version of VSSHP with the same version level has already been installed, make
sure to uninstall it before installation. Afterwards newly install VSSHP, and execute setting. If installing
a new VSSHP without uninstalling the existing VSSHP, the following message appears:
■
Provider registration
When registering VSSHP in VSS ended abnormally at installation, the following message is displayed.
VSSHP is not registered.
Register VSSHP using the "Provider Registration/Deletion Command". For details, refer to
Provider Registration/Deletion Command (stxvprovider)" (page
128
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED
53).
P3AM-4582-03ENZ0
"8.1