G4282-49; Connectivity; Management; Switch Configuration Using Webview - Enterasys Gold Distributed Forwarding Engine 4G4282-49 Hardware Installation Manual

Connectivity

Table 1-1 Optional Ethernet Interface Modules, Compliance, and Physical
Connections
Ethernet Interface Module
7G-6MGBIC-A
7G-6MGBIC

Connectivity

4G4202-72
The 4G4202‐72 has 10BASE‐T/100BASE‐TX/1000BASE‐T compliant ports through 72,
fixed RJ45 front panel connectors.

4G4282-49

Depending on how the 4G4282‐49 (Figure
• 48, 10BASE‐T/100BASE‐TX/1000BASE‐T switched ports connected through 48, fixed
RJ45 front panel connectors, or
• 48, 10BASE‐T/100BASE‐TX/1000BASE‐T switched ports plus an optional Gigabit
expansion uplink module.

Management

Management of the module can be either in‐band or out‐of‐band. In‐band remote
management is possible using Telnet, Enterasys Networks' NetSight
application, or WebView™ application. Out‐of‐band management is provided through
the RJ45 COM (Communication) port on the front panel using a VT100 terminal or a
VT100 terminal emulator.

Switch Configuration Using WebView

Enterasys Networks' HTTP‐based Web management application (WebView) is an
intuitive web tool for simple management tasks.
1-6 Introduction
Compliant to
1-Gigabit Ethernet
1-Gigabit Ethernet
1‐1) is configured, it can support up to
Physical Connection
Six port slots that support optional
hot-swappable Mini-GBICs.
Six port slots that support optional
hot-swappable Mini-GBICs.
®
management